Enable Discovery Via Remote Server List; Edit Remote Zerver List - JVC VR-N100U User Manual

VR-N100U USERS MANUAL

Enable Discovery via Remote Server List...

This is the second option that accommodates discovery of remote VR-N100Us. These VR-N100Us cannot be
discovered by the conventional means of subnet broadcasting and Microsoft browsing. When this feature is
enabled, there will be checkmark next to the option (see below).
Every time VDRView is started up or Refreshed, the Remote Zerver List is scanned and remote discovery of
the VR-N100Us on the list is initiated. Remotely discovered VR-N100Us listed in the VDRView window will
display Remote Zervers in the Discovery Method column. Remote VR-N100Us must have up to date firmware
in order to be correctly discovered by this Remote Zerver function.
If VDRView is unable to communicate with any Zerver found in the Remote Zerver List during discovery, either
the Name or the IP Address, whichever was entered in the Remote Zerver List, will display in its respective field,
the Discovery Method field will display Remote Off-line, and all other fields will display Unknown.
VDRView will continue to attempt to communicate with and discover the remote VR-N100U each time the off-line
VR-N100U is selected in the VDRView list. When the attempt is successful, the list will be updated with the
remote VR-N100U's information.

Edit Remote Zerver List...

Remote appliances can only be included in the VDRView listing by manually adding each VR-N100U name or IP
address to the Remote Zerver List.
Page 58 of 98 All Items Are Subject To Change Without Notice Feb. 2004 Rev 1.0