The Administration "Networks" Utilities; Network Information; Static Ip Setup - JVC VR-N100U User Manual

Jvc video disc recorder user manual

Hide thumbs Also See for VR-N100U:

Table of Contents

VR-N100U USERS MANUAL

3.4.

The Administration "Networks" Utilities

Proceed to select the Administration icon on the VR-N100U Toolbar to get back to the main Administration Utilities page.

From there, select the Networks Utility Page link to navigate to the following pages.

By selecting the View network settings link, it will bring you to the Information page that provides an overview of all of the

network settings for your VR-N100U. One of the immediate management benefits of the Information page is that from a

single screen, the administrator is able to determine the current networking setting of the VR-N100U.

This page displays the IP Address, Subnet Mask, IP Broadcast, Default Gateway, DNS, Domain Name, WINS Server, AFP

and Ethernet Address information of the VR-N100U as well as how some of the settings were obtained. Details regarding any

of these network parameters can be found in the 7. Glossary of Terms section of the manual.

Administrators can easily setup static IP addresses for each VR-N100U in the event that there is no DHCP server being

utilized on the network. By selecting the Static IP link, the window will display a form with seven fields. Information regarding

IP Address, Subnet Mask, IP Broadcast and Default Gateway must be filled in along with selecting Yes for Enable Static IP

Address. Proceed to click the Save button, and then a reboot screen will appear. You must select the Yes button so that VR-

N100U can go through an automatic reboot using the new IP address and the other information you provided in the form. If

you click on Cancel, the information you provided will still be saved, however, it will not be activated until you reboot the VR-

N100U.

Page 32 of 98

All Items Are Subject To Change Without Notice

Feb. 2004 Rev 1.0

Table of Contents