Table of Contents
Advertisement
INSTALLING YOUR NEW UNIT
16
EN
Basic Connections
Mains outlet
Mains power cord
Back of unit
To [L-1 IN/OUT]
To [S-VIDEO
To
OUT]
[AUDIO
21-pin SCART
OUT]
cable
(supplied)
Audio cable
(not supplied)
S-video cable
(not supplied)
It's essential that your unit be properly connected.
ATTENTION:
Connect the AC plug only after all connections to the TV has
been completed.
THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO
OPERATION CAN BE PERFORMED.
1
Make sure the package contains all of the accessories listed in
ASPECIFICATIONSB (A pg. 85).
2
Place the unit on a stable, horizontal surface.
3
Connect the unit to a TV depending on the TV and cables you
use.
8 Basic Connection
To connect to a TV with 21-pin SCART connector ^
A Disconnect the TV aerial cable from the TV.
B Connect the TV aerial cable to the [ANTENNA IN] connector on
the rear panel of the unit.
C Connect the [ANTENNA OUT] connector on the rear panel of
the unit and the TV's aerial connector with the supplied RF
cable.
D Connect the [L-1 IN/OUT] connector on the rear panel of the
unit and the TV's 21-pin SCART connector with a supplied 21-
pin SCART cable.
●
The [L-1 IN/OUT] connector accepts and delivers either a
composite signal (regular video signal), Y/C signal or RGB
signal.
●
Set your TV to the VIDEO (or AV), Y/C, or RGB mode according
to the type of your TV's SCART connector.
TV aerial cable
To [ANTENNA IN]
To
[COMPONENT
To
VIDEO OUT
[VIDEO
(Y/P
OUT]
[ANTENNA
BNC video
Component
cable (not
video cable
supplied)
(not supplied)
RF cable
(supplied)
TV
To 75 ohm
terminal
To connect to a TV with BNC connector ^
A Perform A – C of ATo connect to a TV with 21-pin SCART
connector ^B in the left column.
B Connect an optional audio cable between the [AUDIO OUT]
connectors on the rear panel of the unit and the TV's audio
input connectors.
C Connect an optional BNC video cable between the unit's BNC
[VIDEO OUT] connector and the TV's BNC VIDEO input
connector.
8 S-Video Connection
To connect to TV's S-VIDEO input and AUDIO input
connectors ^
A Perform A – C of ATo connect to a TV with 21-pin SCART
connector ^B in the left column.
B Connect the unit's [S-VIDEO OUT] connector to the TV's
S-VIDEO input connector.
C Connect the unit's [AUDIO OUT] connectors to the TV's AUDIO
input connectors.
●
If your TV is not stereo-capable, use the unit's [AUDIO OUT]
connectors to connect to an audio amplifier for Hi-Fi stereo
sound reproduction.
●
Set AL-1 OUTPUTB to ASCART S-VIDEOB when using the S-
Video connection.
/P
)]
B
R
To
8 Component Video Connection
To connect to TV's component video input connectors ^
OUT]
A Perform A – C of ATo connect to a TV with 21-pin SCART
connector ^B in the left column.
B Connect the unit's [COMPONENT VIDEO OUT (Y/P
connectors to the TV's component video input connectors.
C Connect the unit's [AUDIO OUT] connectors to the TV's AUDIO
input connectors.
●
You can obtain high-quality component video pictures.
●
The [COMPONENT VIDEO OUT (Y/P
output DV signals.
●
If your TV is not stereo-capable, use the unit's [AUDIO OUT]
connectors to connect to an audio amplifier for Hi-Fi stereo
sound reproduction.
●
By using the component video connection, you can view the
images in the progressive mode. For switching to the
progressive mode, refer to AScan Mode Set (HDD & DVD Deck
Only)B (A pg. 80).
NOTE:
Select an appropriate option of AL-1 OUTPUTB as follows
(A pg. 63):
When your TV's SCART
connector accepts:
Composite signals
Y/C signal (separated
luminance (brightness) and
chrominance (colour) signals)
RGB signal
Component video signal
When the setting selected is not in accordance with the TV
connected and depending on the type of appliance connected to
the unit, the correct picture will not appear.
4
Plug the end of the mains power cord into a mains outlet.
●
ALOADINGB blinks on the front display panel when the AC plug
of the mains power cord is connected into a mains outlet and it
takes approximately 50 seconds for the unit to be turned on.
This is not a malfunction.
/P
)]
B
R
/P
)] connectors do not
B
R
Set AL-1 OUTPUTB to:
ASCART VIDEOB
ASCART S-VIDEOB
ASCART RGBB
ACOMPONENTB
Hide quick links:
Advertisement
Table of Contents
