JVC SR-DVM70EU Instructions Manual page 73

INPUT COLOUR SYSTEM
8
You can play back PAL discs, or record PAL and SECAM signals
on this unit. Select the appropriate colour system.
PAL
:
To record PAL signals.
SECAM
:
To record SECAM signals.
JUMP TIME 15 MIN
^
8
You can locate a scene ahead of or behind the currently viewed
one by jumping a selected time interval during playback (or Live
Memory Playback). For details, refer to AJump SearchB (A pg. 24,
38).
DISPLAY SET
SUPERIMPOSE AUTO
^
8
When this function is set to AAUTOB, various operational indicators
appear on the TV screen. Messages appear in the selected
language. (A pg. 20)
AUTO
:
To superimpose operational indications for approximately five
seconds just after the corresponding operation.
ON:
To turn on superimposed indications.
OFF:
To turn off superimposed indications.
NOTES:
●
When you use this unit as the source player for editing, be sure to
set ASUPERIMPOSEB to AOFFB before starting. (A pg. 62)
●
When you select AAUTOB, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
BLUE BACK ON
^ OFF /
8
When this function is set to AONB, the TV screen becomes all blue
when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals,
set this function to AOFFB.
DIMMER BRIGHT
^ / DIMMED
8
You can change the brightness of the front display panel.
BRIGHT
:
Normally select this.
DIMMED
:
To dim the front display panel. (Blue lamp on the front display
panel is turned off.)
POWER SAVE OFF
^
8
When this function is set to AONB, you can reduce the power
consumption while the unit is turned off.
NOTES:
● During Power Save mode ^
^ the front display panel will be turned off.
^ the Just Clock function (A pg. 77) does not work.
● Power Save does not work when ^
^ the unit is in the Timer mode.
^ the unit's power is turned off after timer-recording or Instant
Timer Recording.
^ the Automatic Satellite Programme Recording mode is
engaged. (A pg. 48)
^ AL-2 SELECTB is set to ADECODERB, ASAT VIDEOB or ASAT
S-VIDEOB. (A pg. 63)
●
It takes some time for the unit to complete initialisation after you
turn on the unit power, with AWAKE UPB blinking on the front
display panel.
PAL
/ SECAM
^
/ 30 MIN / 1 HR
/ ON / OFF
/ ON
ON SCREEN LANGUAGE
8
This unit offers you the choice to view on-screen messages in 10
different languages. Although Auto Set Up selects the language
automatically (A pg. 19), you can change the language setting
manually as required.
For details, refer to AOn-screen Language SetB (A pg. 20)
SUBSIDIARY SETTINGS
EN
73