Format A Disc (Dvd Deck Only) - JVC SR-DVM70EU Instructions Manual

SUBSIDIARY SETTINGS
78
EN

Format A Disc (DVD Deck Only)

Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.
ATTENTION:
●
When a disc is formatted, all recordings and data are erased. It
is impossible to restore them.
●
Never turn off the unit or disconnect the mains power cord
while ANOW FORMATTING...B is displayed on the TV screen.
●
Turn on the unit.
●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
●
Load a DVD-RAM/RW disc to format.
ENTER
CABLE/SAT
TV DVD
FGDE
SET UP
Format A DVD-RAM Disc
1
Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2
Press SET UP to access the Main Menu screen.
3
Press D E to select AHDD/DVD/DV SET UPB, then press G.
4
Press D E to select ADISC SET
UPB, then press G.
5
Press FGD E to select
AFORMATB, then press
ENTER. Press D E to select
AOKB, then press ENTER.
6
Press D E to select
AEXECUTEB, then press
ENTER.
Format A DVD-RW Disc
1
Perform steps 1 to 4 of AFormat A DVD-RAM DiscB as above
before continuing.
2
Press FGD E to select AFORMATB, then press ENTER. Press
D E to choose AVR MODEB or AVIDEO MODEB, then press
ENTER when ADISC WILL BE FORMATTEDB appears on the
TV screen.
AVR MODEB:
To be chosen when you want to record, erase, or edit data on
the disc repeatedly.
AVIDEO MODEB:
To be chosen when you want to erase all the data on the disc
once played back to record new data, or play back the disc on
other DVD players.
3
Press D E to select AEXECUTEB, then press ENTER.
NOTES:
●
It is impossible to format Version 1.0 DVD-RW discs in Video
mode.
●
It is impossible to format DVD-R discs.
●
All the titles on a disc will be deleted once the disc is formatted
even if they are protected titles. (A pg. 51)
DVD VIDEO SET UP HDD/DVD/DV SET UP FUNCTION SET UP INITIAL SET UP
HDD SET UP DVD SET UP DISC SET UP DV SET UP
CANC. FINALIS.
FINALISE
Video
FORMAT
ENTER
SET UP SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT
SELECT