Lat/Lon Grid; Navaids On Bird's Eye View; Chart Select; Set Simulation Position (Advanced) - Humminbird 1100 Series Operation Manual

Lat/Lon Grid allows you to display or hide a grid showing latitude and longitude lines.
Navaids on Bird's Eye View allows you to display or hide additional navigational aids in Bird's
Eye View, such as lights and buoys.
NOTE: You will see more navigational aids with an optional-purchase SD memory card.
Chart Select allows you to choose which chart to use if you have built-in charts or a map card.
If you select Auto, your unit will select a chart automatically. Select Right to use the SD card
installed in the right card slot, and select Left to use the SD card installed in the left card slot
(see SD Memory Card Slots: Add Maps to Your Fishing System).
NOTE: The SD Memory Cards require a separate purchase. For more information, visit our Web site at
humminbird.com or contact our Customer Resource Center at 1-800-633-1468.
z
Set Simulation Position allows you to set the position of the boat used in the Simulator. Press
any arrow on the 4-WAY Cursor Control key to activate the cursor and move it to the coordinates
where you want start the simulation. Then confirm the position using the Set Simulation menu
setting.
NOTE: The cursor must be active in order for this procedure to work. If the cursor was not active before
you began this procedure, an error message will appear. Exit the menu, set the cursor, then try again.
Set Map Offset allows you to change the map offset used by your Fishing System. Press the 4-
WAY Cursor Control key to activate the cursor and move it to the location where the Map Offset
will be applied. Then, confirm the map offset position using the Set Map Offset menu setting.
The Map Offset will be applied to all maps and not just the map that requires the correction. The
Map Offset should be cleared if a different map is to be used.
Chart Menu Tab

Lat/Lon Grid

Settings: Hidden, Visible; Default = Hidden

Navaids on Bird's Eye View

Settings: Hidden, Visible; Default = Visible

Chart Select

Settings: Auto, Contour XD, Left Chart Card, Right Chart Card;
Default = Auto
Set Simulation Position
(Advanced)
Settings: Press the RIGHT Cursor key and follow screen instructions to
activate.
Set Map Offset
(Advanced)
Settings: Press the RIGHT Cursor key and follow screen instructions to
activate.
152