Depth Lines (Advanced); Si Range Lines (Advanced, Side Imaging® View Only [1199Ci Hd Si]) - Humminbird 1100 Series Operation Manual

Depth Lines divide the display into four equal sections which are separated by three horizontal
depth lines. The depth of each line is displayed along the depth scale. You can turn Depth Lines
On or Off.
SI Range Lines divide each side beam range into four equal sections on the display. SI Range
Lines can be used to interpret the location of objects on the display. You can turn SI Range Lines
On (visible) or Off (hidden).
NOTE: The range numbers are estimated and should not be used for measurement.
NOTE: If both SI Range Lines and Contour Mode are turned on, the SI Range Lines will remain on the
display, but the individual range numbers are not available (see Side Imaging® X-Press™ Menu: SI
Enhance).
Depth Lines
(Advanced)
Settings: Off, On; Default = On
SI Range Lines
(Advanced, Side Imaging® View only [1199ci HD SI])
Settings: Off, On; Default = Off
SI Range Lines (with Contour Mode Off)
139
Depth Lines
Range Numbers
SI Range Lines
Sonar Menu Tab