Multiscreen Display - Pioneer PDP-505CMX Operating Instructions Manual

2 Using the 5/∞/2/3 buttons, move the screen to
the desired part of the image.
x 1.5
R12
24
SCROLL
÷ Pressing the POINT ZOOM and 5/∞/2/3 buttons
again changes the zoom ratio and the position of the
enlarged screen.
÷ If the input signal changes, if input is changed through
the menu screen, or if the multiscreen mode is chosen,
the POINT ZOOM function is cancelled.
.

Multiscreen display

The panel's multiscreen function allows the simultaneous
display of two inputs. The multiscreen display includes
three modes: 2-SCREEN, PinP, and PoutP.
SPLIT
SUB INPUT
1
Press the remote control's SPLIT button.
Pressing the SPLIT button causes the display to cycle
through the following options:
3 2-SCREEN 3 PinP
P.ZOOM ZOOM
DISPLAY
PIP SHIFT
SWAP
3 PoutP 3 OFF
1 2-SCREEN
The main screen appears on the left and the subscreen
shows on the right.
2 PinP
The subscreen appears in one of the four corners of the
main screen.
3 PoutP
The subscreen appears beyond the right side of the
main screen.
2
Press the remote control's SUB INPUT butto
select the subscreen input source.
To exchange the main screen and subscreen
inputs
Press the remote control's SWAP button.
¶ In 2-SCREEN mode:
The right and left sides of the display switch; what
was previously the main screen becomes the sub-
screen and vice versa.
¶ In PinP or PoutP mode:
What was previously the main screen image appears
in reduced size as the subscreen image and vice
versa.
Operation
66.0
R12
24
66.0
R12
24
66.0
24 R12
n to
23
En