Enlarging One Part Of The Screen (Point Zoom) - Pioneer PDP-505CMX Operating Instructions Manual

50-inch; 43-inch professional plasma display
Hide thumbs Also See for PDP-505CMX:
Table of Contents

Advertisement

Available languages

Available languages

Operation
4 PARTIAL
*Supported only on PDP-505CMX/PDP-504CMX
The [PARTIAL] setting is available only during input from
a computer (1280 x 1024 input only).
The input signal and the screen maintain a dot to line ratio
of 1:1; the appearance is highly faithful to the source.
However, to maintain the 1:1 ratio, a portion of the display
does not appear on the screen.
Use the 5/∞ buttons to adjust the vertical position of the
video image on the screen.
5 ZOOM (*Supported only on PDP-434CMX)
The [ZOOM] setting is available only during input from
a computer (1280 x 1024 input only).
A portion of the display does not appear on the screen.
Use the 5/∞ buttons to adjust the vertical position of the
video image on the screen.
Moving the screen position
upward or downward
Press the 5/∞ buttons.
When playing a [PARTIAL] or [ZOOM] image (1280 x 1024
input only) from a computer, the vertical position of the
screen image can be adjusted. However, adjusted positions
cannot be stored in memory.
Note
The image cannot be horizontally repositioned.
22
En
768 lines
1024 lines
768 lines
1024 lines
Enlarging one part of the screen
(POINT ZOOM)
This panel allows enlarging of the screen image by ratios
of [x 1.5], [x 2], and [x 3]. When enlarging the display
screen, the 5/∞/2/3 buttons can be used to move the
enlarged viewing area around the screen.
¶ The possible zoom range can be confirmed by viewing the
Zoom-Area subscreen at the upper right of the main screen.
The Zoom-Area subscreen appears for approximately 3
seconds whenever the POINT ZOOM button, the DISPLAY
button or one of the 5/∞/2/3 buttons is pressed.
Press the remote control's POINT ZOOM button.
1
.
x 1.5
66.0
24
SCROLL
Pressing the POINT ZOOM button causes the zoom ratio
to cycle through the following options:
3 OFF
3 x 1.5
Reminders
¶ While using the POINT ZOOM function, the screen size can-
not be changed.
¶ When using a plasma display panel in a profit-making activity or
when exhibiting images publicly, using the screen size function
to compress or stretch the image may result in infringement of
the copyrights of the image's owner(s).
DISPLAY
POINT
ZOOM
5/∞/2/3
R12
ZOOM
P.ZOOM
Zoom-Area subscreen
3 x 2
3 x 3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pdp-434cmx

Table of Contents