Power Cord Connection - Pioneer PDP-505CMX Operating Instructions Manual

Installation and Connections

Power cord connection

Connect the power cord last, after all other connections
have been completed.
1
Connect the power cord to the plasma display panel.
2
Plug the power cord into an outlet.
CAUTION
÷ Use only the power cord provided.
÷ For the Plasma Display, a three-core power cord with a ground
terminal is used for efficiency protection.
Always connect the power cord to a three-pronged, grounded
outlet, making sure that the cord is properly grounded. If you
use a power source converter plug, use an outlet with a ground
terminal and screw down the ground line.
NO!
Do not use a power supply voltage other than that indicated (AC
100 - 120 V, 50/60 Hz) as this may cause fire or electric shock.
14
En