Brother MFC-7360 Quick Start Manual page 16

USB
For USB Interface Users
19
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
IMPORTANT
For Mac OS X 10.4.10 users, upgrade to
Mac OS X 10.4.11 - 10.6.x. (For the latest
drivers and information on the Mac OS X you
are using, visit http://solutions.brother.com/.)
Note
(MFC-7470D only) If you want to install the PS
driver (BR-Script3 printer driver), please go to the
Brother Solutions Center at
http://solutions.brother.com/, click Downloads on
your model page and visit FAQ's for setup
instructions.
b
Connect the USB cable to the USB connector
marked with the
and then connect the cable to your Macintosh.
c
Make sure your machine's power switch is on.
16
(Mac OS X 10.4.11 - 10.6.x)
symbol on your machine
20
Install MFL-Pro Suite
a
Put the installation CD-ROM into your
CD-ROM drive.
b
Double-click the Start Here OSX icon. Follow
the on-screen instructions.
Note
It may take a few minutes for installation to
complete.
c
Follow the on-screen instructions until this
screen appears. Choose your machine from
the list, and then click OK.
d
When this screen appears, click Next.
The installation of MFL-Pro Suite is now
complete.
Go to step 21 on page 17.
Macintosh