5. Infl ation stops automatically and the measurement is started. As the cuff defl ates,
decreasing numbers appear on the display and the Heartbeat Symbol (
6. When the measurement is complete, the arm cuff completely
defl ates. Your blood pressure and pulse rate are displayed.
7. Press the START/STOP button to turn the monitor off.
NOTE: The monitor will automatically turn off after
fi ve minutes.
SPECIAL CONDITIONS
CAUTION
Infl ating to a higher pressure than necessary may result in bruising where the
cuff is applied.
If your systolic pressure is known to be more than 220 mmHg, press and hold the
START/STOP button until the monitor infl ates 30 to 40 mmHg higher than your
expected systolic pressure.
NOTE: • Do not apply more pressure than necessary.
• The monitor will not infl ate above 299 mmHg.
When the measurement is complete, the arm cuff completely defl ates. Your blood
pressure and pulse rate are displayed.
TAKING A MEASUREMENT
18
) fl ashes.