Underwater Lights; Jets 1; Jets 2; Auxiliary Jet Control - Marquis e-serie Owner's Manual

marquis s pa cont rol op erat ion

UNDERWATER LIGHTS

Press the LIGHT pad on bather's panel to turn the
underwater lights on and off. The low-voltage system
produces a night light for evening use. After being on
for 60 minutes, the lights automatically turn off.
For Aqua Ambiance and Constellation use SPA LIGHT
pad. Step one: turn on light. Step two: turn off and then
on within 2-3 seconds to change color.
NOTE: LED lights do not qualify for labor coverage.
These parts can be purchased or exchanged under
warranty at your authorized Marquis dealer.
®

JETS 1

Use the JETS 1 pad on the bather's panel control.
First press of the JETS 1 pad activates pump on low-
speed. Second press of the JETS 1 pad activates
pump on high-speed. Third press of the JETS 1 pad
turns jets off. If the system is in a filter cycle or calling
for heat, low speed will continue to run. The high and
low speed operation will stop after 15 minutes of use.
To restart the pump, press the JETS 1 pad. The yellow
LED indictor by the JETS 1 pad will illuminate anytime
the pump is running.

JETS 2

Press JETS 2 pad to turn on pump two to low speed.
Pressing a second time will turn the pump on high
speed. Pressing a third time will turn the pump off.
The high speed of pump two will run for 15 minutes
and then switch to low speed. Once on low speed,
the pump will run for 15 minutes and then shut off. To
restart the pump to your desired speed, press the
JETS 2 pad. The yellow LED indictor by the JETS 2
pad will illuminate anytime the pump is running.
AUXILIARY JET CONTROL (select models)
Your spa may be equipped with either one or two
additional jet pump controls. The controls operate
the pumps in the seat adjacent to the controls in the
same manner that the master panel does. Pressing
the pad once will turn the jet pump on low speed,
pressing again will turn the jet pump on high speed,
and pressing again will turn the jet pump off. If you are
controlling the primary jet pump, it may continue to
run on low speed if the spa is in a filtration cycle or is
calling for heat.
36