I/F Timeout - Konica Minolta bizhub C203 Operation Manual

Settings on the control panel
12.4.8

I/F Timeout

You can set the time until a communication timeout occurs for the USB or network interface. (Default setting:
60 sec.)
!
Detail
For details on displaying the Administrator Settings screen, refer to "Displaying the Administrator
Settings screen" on page 12-34.
1
In the Administrator Settings screen, touch [7 Printer Settings].
2
In the Printer Settings screen, touch the button of the desired interface setting.
3
Press the [C] (clear) key to erase the value, and then use the keypad to type in the time. (10 - 1,000
seconds)
– If a value outside of the allowable range is specified, the message "Input Error" appears. Type in a
value within the allowable range.
4
Touch [OK].
The time until a communication timeout occurs is set.
bizhub C353/C253/C203 (FE2)
12
12-43