Merging Pcm Samples From Various Sources - Korg Pa3X 76-keys User Manual

Merging PCM samples from various
sources
When you load a .SET folder, all User PCM Samples in memory
are deleted. So, there is no way to merge different samples by
loading complete .SET folders.
To merge samples from several sources, you must load single
Sounds or Drum Kits based on User PCM Samples.
Delete all samples and multisamples
1. If you want to delete all samples and multisamples already
in memory, press the SOUND button to access the Sound
mode, then press the RECORD button to access the Sam-
pling mode.
While in Sampling mode, choose the "Delete Sample" com-
2.
mand from the page menu. Choose the "All Samples, Multi-
Sample, DrumSamples" option, and touch OK to delete all
samples and multisamples.
Warning: Before deleting, be sure to have a copy of any
important data you don't want to lose.
To exit from the Sampling mode, choose the "Exit from
3.
Record" command from the page menu.

Merging PCM samples from various sources

Create a new .SET of samples
Press the MEDIA button to access the Media mode. Go to
1.
the Load page.
Open a first .SET folder containing some of the PCM sam-
2.
ples to merge. Open the SOUND folder, then one of the
USER banks, and choose the first of the Sounds or Drum
Kits based on samples you would like to load. Touch Load,
and choose a target User location in memory.
The Sound or Drum Kit is loaded, together with the PCM
samples it is based on.
3. Do the same with any subsequent Sound or Drum Kit
whose samples you would like to load.
When finished loading, save a new .SET folder, being sure
4.
the PCM option is checked in the Save All dialog (see "Sav-
ing the full memory content" on page 230, or "Saving all
data of a specified type" on page 230).
Media edit mode
241