Style Tracks View Page - Korg Pa3X 76-keys User Manual

Style Play operating mode
114

Style Tracks view page

No icon Play status. The track can be heard.
Mute status. The track cannot be heard.
Panels
The lower half of the main page contains the various panels, you
can select by touching the corresponding tabs. See more infor-
mation in the relevant sections, starting from page 115.
Volume panel
Style Tracks view page
Press the TRACK SELECT button to switch from the Normal
view to the Style Tracks view. With the Volume tab selected,
individual Style tracks are shown in the lower half of the display,
while the upper half of the main page changes to show parame-
ters for the selected Style track.
Selected track
info area
Sounds area
Press TRACK SELECT again to return to the Normal view (Key-
board tracks, grouped Style tracks, Mic/In controls).
Original Style Sounds
This parameter lets you assign different Sounds to the Style
tracks, overriding the Sounds recorded into each Style Element
pattern. These Sounds can be saved into a Performance or Style
Setup with the "Write Performance" or "Write Current Style Set-
tings" commands (see page 137).
Assigned Sounds, with this parameter turned on, are shown in
the Sounds area of this page.
Note: When assigning a Sound to a Style track, the "Original Style
Sounds" parameter is automatically turned off.
Note: This parameter can be saved with the Performance or Style
Setup, and is automatically set to On or Off when you select a dif-
ferent Performance or Style, depending on the saved status.
On Style tracks always use the original Sounds
recorded in each Style Element. If you assign a
Tabs
different Sound to a Style track, this parameter is
automatically set to Off.
Off You can assign different Sounds to each Style
track, and save them in a Performance or Style
Settings. The selected Sounds are the same for all
Style Elements (there are no different Sounds for
each Style element).
Selected Track Info area
This line lets you see the Sound assigned to the selected track. It
appears both in the main page, and in several edit pages.
Track name
Sound name
Track name
Name of the selected track.
Sound name
Sound assigned to the selected track. Touch anywhere in this
area to open the Sound Select window, and select a different
Sound.
Sound bank
Bank of the selected Sound.
Program Change
Program Change number sequence (Bank Select MSB, Bank
Select LSB, Program Change).
Sounds area
This area lets you see the Sound's bank, and octave transposition
for the eight Style tracks.
Style track's octave transpose icon
Set
Sound bank's icon
Style track's octave transpose icon
Non editable. Octave transpose of the corresponding track. To
change the octave transpose, use the UPPER OCTAVE buttons,
or go to the "Mixer/Tuning: Tuning" edit page (see page 123).
Sound bank's icon
This picture illustrates the bank the current Sound belongs to.
Touch an icon a first time to select the corresponding track
(detailed information are shown on the Selected Track Info area,
see above). Touch it a second time to open the Sound Select win-
dow.
Sound bank
Program Change
Set
Set
Set
Set