Song Edit: Move; Song Edit: Rx Convert - Korg Pa3X 76-keys User Manual

Song Edit: Move

Here you can shift a track forward or backward by just a few
ticks or whole measures.
After setting the various parameters, touch Execute to complete
the operation.
Track
Use these parameters to select the track you want to move.
Track 1...16 Selected track.
Start / End Tick
These parameters set the starting and ending point of the range
to move.
To Tick
This parameter allows you to set the target starting point of the
moved track.

Song Edit: RX Convert

You can use the RX Convert page to convert notes of the midifile
into RX Noises, and vice-versa. This will help programming
Songs on an external sequencer.
After having chosen a track to convert, touch Execute to com-
plete the operation.
Track
Use these parameters to select the track containing the notes or
RX Noises you want to convert.
Sequencer operating mode
RX Note Velocity
Use this parameter to adjust the volume level of the RX Noises in
the selected track(s).
Add RX Noises to Guitar track
Use this parameter to automatically analyze the Standard MIDI
File, and add RX Noises to Guitar tracks. This command scans a
single track or the whole Standard MIDI File, looking for guitar
strumming played by nylon, steel or electric guitars.
After scanning, a suitable Guitar sound will be automatically
assigned to the relevant tracks, and RX Noises automatically
added where needed.
This means that you can transform any flat SMF into an ultra-
realistic song with a real guitar player inside – at the touch of a
button!
195
Song Edit: Move