Getting Started; Before Making Any Connections; To Connect To A Tv - JVC XV-M565BK Instructions Manual

Dvd video player
Hide thumbs Also See for XV-M565BK:
Table of Contents

Advertisement

Getting started

Connections
*In the following description, "TV" may be substituted with "monitor" or "projector."
*Before using the unit, you have to connect the unit to a TV and/or amplifier.

Before making any connections

• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the
component you are going to connect.

To connect to a TV

You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio
outputs to your separate audio equipment. (See the following pages.)
The unit
VIDEO OUT
COMPONENT
VIDEO S-VIDEO
Y
P
B
AUDIO OUT
DIGITAL OUT
AV COMPU LINK
PCM / STREAM
COAXIAL
VIDEO OUT
L
SELECT
ATTENUATOR
NTSC
PAL
OFF
ON
R
Yellow
Red
Audio/video cable
(supplied)
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video
cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts
stereo audio output to monaural.
• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the supplied S-
video cable in addition to the (standard) video connection to get better picture quality.
Set the ATTENUATOR switch to OFF normally. If you hear audio sound distorted because the sensitivity of the audio
input of your TV is too high, set the switch to ON.
The unit is compatible with the PAL and NTSC color systems. Set the VIDEO OUT SELECT switch on the rear panel to
match the color system of your TV. Make sure that the color system of the DVD/Video CD/SVCD disc labeled on the
package matches your TV.
If you use a multi-system TV, you can play discs recorded on both PAL and NTSC systems.
NOTE
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may
cause a monitor problem when playing back a copy-protected disc.
P
R
OPTICAL
White
*If the TV has an AV COMPU LINK terminal,
you can use the AV COMPU LINK function.
See "AV COMPU LINK remote control system"
on page 49 for details.
S-video cable
(supplied)
TV
IN
Yellow
White
Red

Getting started

S-VIDEO
VIDEO
LEFT
AUDIO
RIGHT
English
Français
12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xv-m567gd

Table of Contents