Getting Started; Connections; Before Making Any Connections; To Connect To A Conventional Tv - JVC XV-S62SL Instructions Manual

6(1*ERRN 3DJH  :HGQHVGD\ 0D\    30

Getting started

Connections

*In the following description, "TV" may be substituted with "monitor" or "projector."
*Before using the unit, you have to connect the unit to a TV and/or amplifier.

Before making any connections

• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the
component you are going to connect.

To connect to a conventional TV

You can enjoy playback by simply connecting the unit to a TV. To improve audio sound quality, connect the AUDIO OUT
jacks to your separate audio equipment. (See the following pages.)
The unit
VIDEO
PCM / STREAM
RIGHT LEFT
OPTICAL COAXIAL
S-VIDEO
DIGITAL OUT AUDIO OUT
Red
White Yellow
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo
audio output to monaural.
• If your TV has an S-video input, you can get better picture quality by connecting it with the S-VIDEO output of the unit
using the S-video cable (optional) in addition to the (standard) video connection.
NOTES
• When connecting to a TV using the VIDEO OUT jack, make sure that the PROGRESSIVE indicator on the front panel is not lit. If
it is lit, the VIDEO and S-VIDEO outputs do not feed the correct signals. To turn off the PROGRESSIVE indicator, see "How to
make the Progressive scan mode active" on page 15.
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may
cause a monitor problem when playing back a copy-protected disc.
14
AV COMPU LINK
COMPONENT
Y P P
B R
VIDEO OUT
S-video cable
(not supplied)
Audio/Video cable
(supplied)
If the TV has an AV COMPU LINK terminal,
you can use the AV COMPU LINK function.
See "AV COMPU LINK remote control
system" on page 51 for details.
T V
IN
S-VIDEO
Yellow
VIDEO
LEFT
White
AUDIO
RIGHT
Red