Connections; Before Making Any Connections; To Connect To A Tv, Monitor, Or Projector With The Audio Input And Video Input Jacks - JVC XV-K503TN Instructions Manual

XV-K505GD/XV-K503TN
LET0143-001A
[3U, 4U, US, UB, UT] (EN)
Getting started

Connections

Before using the unit, you have to connect the unit to a TV or amplifier. By connecting to an amplifier which has a
digital terminal or Dolby digital capability, you can enhance the sound quality.

Before making any connections

• Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the
component you wish to connect.
To connect to a TV, monitor, or projector with the audio input and video input
jacks
You can enjoy using the unit by simply connecting it to a television set. To hear improved audio sound quality,
connect the audio outputs to your audio equipment. (See the following pages.)
The unit
VIDEO OUT
VIDEO S-VIDEO
NTSC
AUDIO OUT
LEFT
OFF ON
RIGHT
ATTENUATOR
Yellow
White
Red
Connect the unit to a television set equipped with stereo audio input and video input jacks using the supplied audio/
video cables.
• If your television set has a monaural audio input instead of stereo, you need to use an optional audio cable which
converts stereo audio output to monaural.
• If your television set has an S-video input, you should connect it with the S-VIDEO output of the unit using the
supplied S-video cable in addition to the (standard) video connection to get better picture quality.
The unit is compatible with the PAL and NTSC color systems. Set
monitor, or projector. (Make sure the color system of the DVD disc labeled of the package. If you play the disc
recorded on the different color system, the unit play it incorrectly. Use the disc recorded of the same color system.)
When you use the multi-system TV, monitor, or projector, you can play the disc recorded on both the PAL and NTSC
NTSC
color systems. Set
PAL
ON OFF
The beside the AUDIO OUT jacks should be normally set to OFF. If you hear the audio distorted because the
ATTENUATOR
sensitivity of the TV's audio input is too high, set
NOTE
¶
Connect VIDEO OUT of the unit to the video input of a television set. Connecting VIDEO OUT of the unit to a TV
via a VCR may cause a monitor problem when playing back a copy-protected disc.
16
AV COMPU LINK
PAL
PCM/STREAM
OPTICAL
DIGITAL OUT
Audio/video cable
(supplied)
according or the color system of the disc.
ON
ATTENUATOR
* If the TV has an AV COMPU LINK terminal, see "AV
COMPU LINK remote control system" on page 98.
S-video cable
(supplied)
TV, monitor, or projector
IN
Yellow
Red
White
NTSC
PAL
according to the color system of your TV,
OFF
to ON.
S-VIDEO
VIDEO
RIGHT
AUDIO
LEFT