Advertisement
Getting started
Connections
*In the following description, "TV" may be substituted with "monitor" or "projector."
*Before using the unit, you have to connect the unit to a TV and/or amplifier.
Before making any connections
• • • • Do not connect the AC power cord until all other connections have been made.
Do not connect the AC power cord until all other connections have been made.
Do not connect the AC power cord until all other connections have been made.
Do not connect the AC power cord until all other connections have been made.
• Since different components often have different terminal names, carefully read the instructions supplied with the
component you are going to connect.
To connect to a TV
You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the audio outputs
to your separate audio equipment. (See the following pages.)
The unit
DIGITAL OUT
VIDEO OUT
PCM / STREAM
COMPONENT
Y
P
B
P
R
COAXIAL
RIGHT
LEFT
S-VIDEO
VIDEO
AUDIO OUT
Yellow
White
Red
S-video cable
(not supplied)
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video cables.
• If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which converts stereo
audio output to monaural.
• If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the S-video cable
(optional) in addition to the (standard) video connection to get better picture quality.
NOTES
• Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may
cause a monitor problem when playing back a copy-protected disc.
• Connect the unit to an NTSC television. Do not connect the unit to a PAL television.
Audio/Video cable
(supplied)
T V
IN
S-VIDEO
VIDEO
Yellow
LEFT
White
RIGHT
Red
AUDIO
13
Advertisement
