Advertisement
To connect to an audio amplifier or receiver
You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver.
The unit
DIGITAL OUT
VIDEO OUT
PCM / STREAM
COMPONENT
Y
P
B
P
R
COAXIAL
RIGHT
LEFT
S-VIDEO
VIDEO
AUDIO OUT
Red
White
• Connect the unit's AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver.
To connect to audio equipment with a digital input
You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks to the digital input of an
amplifier, MD, etc. by using a coaxial digital cable (optional). The digital audio signal from a disc is directly transferred. If
you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an optional digital
cable, you can enjoy high-quality surround sound.
When you make the digital connection, we recommend also to make the analog connection, because, depending on
discs, no signal may be output from the DIGITAL OUT.
The unit
DIGITAL OUT
VIDEO OUT
PCM / STREAM
COMPONENT
Y
P
B
P
R
COAXIAL
RIGHT LEFT
S-VIDEO
VIDEO
AUDIO OUT
Red
White
Audio cable
(not supplied)
NOTES
• When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the "DIGITAL AUDIO OUTPUT"
setting in the "AUDIO" page of the preference display correctly according to the connected audio equipment. If the "DIGITAL
AUDIO OUTPUT" is not set correctly, loud noise may be generated from speakers, causing damage to your speakers. See
"DIGITAL AUDIO OUTPUT" on page 37.
• With the digital connection, the COMPRESSION settings in the AUDIO page of the preference display are invalid. Settings for
these items must be made from the decoder.
Audio cable
(not supplied)
Amplifier or receiver
White
Red
Coaxial digital cable
(not supplied)
White
Red
Getting started
IN
LEFT
AUDIO
RIGHT
Digital equipment
IN
IN
OPTICAL
LEFT
AUDIO
DIGITAL
RIGHT
COAXIAL
15
Advertisement
