Table of Contents
Advertisement
DP6060 Dual-Input Process Meter
Connectors Labeling
The connectors' label, affixed to the meter, shows the location of all
connectors available with requested configuration.
Do not connect any equipment other than Omega's
expansion modules, cables, or meters to the RJ45
M-LINK connector. Otherwise damage will occur to the
Warning!
equipment and the meter.
Figure 7. Connector Labeling for Fully Loaded DP6060
Power Connections
Power connections are made to a two-terminal connector labeled
POWER on Figure 7. The meter will operate regardless of DC polarity
connection. The + and - symbols are only a suggested wiring convention.
POWER
+ -
Required External Fuse:
5 A max, 250 V Slow Blow
Figure 8. Power Connections
22
Instruction Manual
AC or DC
POWER
Advertisement
Table of Contents
