Table of Contents
Advertisement
Advanced operations
5/∞/2/3
ENTER
3D PHONIC
ZOOM
Special picture/sound effect
To zoom in pictures
1
During playback or while paused,
press ZOOM.
Pressing ZOOM causes the unit to zoom in on the
image.
At the top left of the screen, the information for the
current magnification appears for about 5 seconds.
Each time you press ZOOM, the magnification is
doubled (up to 64 times).
ZOOM x 4
When a picture of a DVD VIDEO disc is viewed on a
normal TV screen (4:3, Letter Box), black bars may
appear at the top and bottom of the screen. In this
case, if you select the "ZOOM × 1.8" mode, the black
bars become almost invisible.
When a 1:2.35 or 1:1.85 DVD VIDEO source is
played back, however, the black bars are visible on
the screen.
2
Press 5/∞/2/3 to move the zoomed
position.
To release the zooming
Press ENTER.
NOTE
While zoomed, the picture may look coarse.
22
To adjust the picture character (VFP)
The VFP (Video Fine Processor) function allows you to
adjust the picture character according to the type of
programming, picture tone or personal preferences.
1
During playback, press VFP.
The VFP mode selection window appears on the TV
screen.
VFP
2
Press 2/3 to select the desired preset.
Each time you press the button, the VFP mode
changes as follows.
Set the video type most suitable to the current
program or the room conditions.
NORMAL
Selected preset
USER 1
Parameter
[NORMAL]: for watching TV in a general room.
[CINEMA]: for watching a movie software in a room
with suppressed light.
[USER 1] [USER 2]: you can adjust parameters that
affect the picture character and store the
settings as a user preset. See the next step.
3
To define a user setting, press 5/∞ to
select a parameter to be edited from
the following.
• GAMMA
Adjust this if the neutral color is bright or dark. The
brightness of dark and bright portion is maintained.
Available range: –4 (darkest) to +4 (brightest).
• BRIGHTNESS
Adjust this if the picture is bright or dark on the
whole.
Available range: –16 (darkest) to +16 (brightest).
• CONTRAST
Adjust this if the far and near position is unnatural.
Available range: –16 to +16.
• SATURATION
Adjust this if the picture is whitish or blackish.
Available range: –16 (blackest) to +16 (whitest).
CINEMA
USER 1
GAMMA
+ 4
+ 4
BRIGHTNESS
CONTRAST
+13
SATURATION
+13
+13
TINT
SHARPNESS
+ 3
Y DELAY
+ 2
USER 2
Advertisement
Table of Contents
