Printer Functions - Sharp MX-5000N Sales Manual

M X - 5 0 0 0 N
M X - 5 0 0 0 N

Printer Functions

Name Description
A4/Letter Auto If you want to print A4 size data but A4 paper has run out, this feature prints it on letter size
Change paper.
Auto Job Control
Automatically displays the job settings before printing so you can check it.
Review
Barcode Font The optional Barcode Font Kit enables printing of barcodes.
Determines how the left, right and top edges of a document's front and back pages are
Binding Edge
positioned when automatically printing on both sides using the duplex function.
Carbon Copy Prints the same data on paper from two or more different paper trays.
Colour selection during printing – the MX-5000N/01N & MX-4100N/01N differentiates
between colour and black & white pages in multi-page files and selects the correct mode
with the following exception:
Colour Detection
Files that contain images are detected and counted as colour documents if Automatic mode
is pre-set in the printer driver. To be always counted and printed as Black & White, select
'Black & White' in the driver.
When a large number of small-volume print jobs are sent to the MX-5000N/01N &
Continuous Print MX-4100N/01N, it processes these jobs as a single print job. This eliminates procedures
normally required between separate print jobs (such as polygon mirror control processing),
(Extra Print Mode)
thus enhancing printing efficiency.
Different Paper Inserts a different type of paper for cover page or inserts. (letter-head paper, coloured paper,
Setting etc.)
When an e-mail account for an MFP is set up on the mail server, the user can send e-mail to
Direct Print
the MFP with attached print data (with extensions such as .pcl, .ps, .pdf, tiff and xps). The
(e-mail)
data can then be printed without using a printer driver. (The MFP prints it automatically.)
An FTP server can be stored in the MFP to enable direct printing of files on the server from
Direct Print (FTP) the
extensions .pcl, .ps, .pdf, tiff, xps, and prn can be printed.
Direct Print (SMB) Prints data directly from the SMB on the network without the need for a printer driver.
Prints data directly from a USB memory device connected to the MFP without the need for a
Direct Print (USB
printer driver. Users select the data in memory from the MFPs control panel and follow
memory)
instructions to print the file.
Prints data with the extensions such as .pcl, .ps, .pdf, tiff, and xps via a Web page without
Direct Print (Web)
the need for a printer driver.
Prints data on both sides of the paper.
Duplex Printing
Encrypted PDF Prints an encrypted PDF using the Direct Print function
ESC/P (Super) Enables setting changes (printing start position, fonts, reduced size printing, etc.) when
Setting printing data in ESP/C.
Automatically selects the appropriate reduction/enlargement ratio to match the paper size
Fit to Page
you select.
Graphics Mode Selects a graphics mode from raster or vector.
Using ICC profile data enables colour balance adjustments with other colour output
ICC Profile
machines.
Chooses portrait or landscape as the image orientation for print jobs.
Image Orientation
Controls and monitors data transmitted to the USB port or network port of MFP. (for
Interface Setting
example, IO time out, or port switching method).
Line Thickness Adjusts the line width of vector graphics. (black and white printing only)
Mirror Image Reproduces a mirror image printout of the original print data.
Prints a notice page automatically (for example, "print error caused by no PIN code in Audit
Notice Page
mode").
Notify Job End A pop-up screen appears on your PC to notify you that the print job has finished.
N-up Prints multiple pages of data onto a single sheet.
Object Control Sets items such as fonts to use and graphics modes.
/ 0 1 N / M X
/ 0 1 N / M X
control panel without
- 4 1 0 0 N / 0
- 4 1 0 0 N / 0
the need for a
1 N S a l e s
1 N S a l e s
printer driver. Files
.
G u i d e
G u i d e
with the
61