Operation; Overview; Turning On/Off; Set Timer - Dimplex DAC 9001 Instruction Manual

OPERATION

1. Power indicator
2. Fan operating indicator
3. Cooling operating indicator
4. FULL WATER indicator
5. Timer (1-8 hours) as well as ON/OFF
switch
6. Speed switch with options for - LOW
FAN, HIGH FAN, LOW COOL, HIGH
COOL.
7. Thermostat

Turning ON/OFF

• Set TIMER to ON for continuous
operation (the unit will operate as
long as it is not turned off). Power
indicator comes on.
• To turn off the unit, turn the TIMER
to OFF position.

Set Timer

Set the TIMER to the desired operating time (1 to
8 hours).When the set time has been reached, the
machine will shut off automatically.

Setting the Temperature

Turn the THERMOSTAT to regulate the
temperature you desired. (This is for cooling
mode only.)

Regulating air flow direction

Turn the roller on air vent to control the air flow
direction of the vertical louvres.
Move the air vent directly to adjust the air flow
direction of the horizontal louvres.
NOTICE!
To prolong the compressor's life, the compressor will only work 3 minutes after you switch the
unit on or re-switch on.The cooling system will switch off if the ambient temperature is lower
than the set one.The ventilation however, keeps working on the set level. If the ambient
temperature rises above the selected level, the cooling will return to work.
1
7
1
7
HIGH
COOL
LOW
COOL
8
DAC9001
2 3 4
6 5
2 3 4
DAC12001
6
LOW
FAN
HIGH
FAN
5