Mounting Of The Exhaust Pipe - Dimplex DAC 9001 Instruction Manual

2. Using the round window
connectors.
• Make a hole (diameter 112mm)
on the wall/glass to fit the
supplied round window
connector.
• Take off the adaptor
one which does not connect
with the unit), fit the hose
directly to the round window
connector.
• When the hole is not in use.
Use the cap
window connector to cover
the hole.

Mounting of the exhaust pipe

1. The supplied exhaust hose can be extended
from 50cm to 150cm for mounting. It is
recommended that you use the hose in the
shortest possible length.
2. Take care to prevent any bow or bend in
the middle of the exhaust hose, as this will
trap hot exhaust air, which will radiate into
the room and cause this unit to shut itself
off due to overheating.
WARNING!
The length of the exhaust pipe is specially
designed according to the specification of this
product. Do not replace or extend it with your own
private hose as this could cause the unit to
malfunction AND VOIDS YOUR WARRANTY
(the
for the round
6
Round window
connector