SEAWATER COOLING SYSTEM
Power Steering
REMOVAL
Refer to Cold Weather or Extended Storage, Draining Instructions in SECTION 1B-Main-
tenance and Precautions in this section, BEFORE proceeding.
1. Drain the seawater system.
2. Disconnect seawater hoses from fluid cooler.
3. Mark fore and aft fluid hoses to aid in reassembly.
NOTE: Obtain two clean, suitable devices and plug hoses in following instructions to avoid
loss of fluid.
4. Using a suitable container to catch excess fluid, disconnect fluid hoses. Plug hoses
quickly.
5. Remove fasteners from clamps retaining cooler.
6. Remove cooler with J-clamp.
Typical Power Steering Cooler Installation
Page 6A-40
a -
D4.2L D-Tronic Cooler
b -
Forward Fluid Hose (From Reservoir)
c -
Aft Fluid Hose (To Pump)
d -
Seawater Hoses
e -
J-clamp And Nut
f -
D2.8L D-Tronic Cooler
NOTICE
a
d
b
e
f
75393
SERVICE MANUAL NUMBER 22
e
d
c
90-860074--1 FEBRUARY 2002
75594