Identification; Specifications; Torque Specifications; Lubricants / Sealants / Adhesives - Mercury MerCruiser D2.8L D-Tronic Service Manual

SERVICE MANUAL NUMBER 22

Identification

Specifications

IMPORTANT: The starter motor is designed to operate under great overload and
produce a high horsepower for its size. It can do this only for a short time, since
considerable heat accumulates and can cause serious damage. For this reason, the
cranking motor must never be used for more than 15 seconds at any one time.
Cranking should not be repeated without a pause of at least 2 minutes to permit the
heat to escape.

Torque Specifications

Lubricants / Sealants / Adhesives

90-860074--1 FEBRUARY 2002
a - Identification Number Location On Starter
Description
I.D. Number
Engine Rotation
Minimum Required Cranking
Battery Size (4 and 6 cylinder)
No-Load Test
Description
Starter Motor
Solenoid
Description
Liquid Neoprene
2-4-C Marine Lubricant With Teflon
a
Specification
0 001 362 3--
Left Hand (Counterclockwise)
750 cca, 950 mca or 180 Ah
11.5 Volts, 125 Amps At 7000 rpm
Nm
68
Tighten Securely
STARTING SYSTEM
70809
lb-in. lb-ft
50
Part Number
92-25111--3
92-802861Q1
Page 4A-3