Connect To A Computer Or Other - Cradlepoint CBR400 Product Manual

CBR400| USER MANUAL Firmware ver. 3.3.0
CRADLEPOINT
3.2 Connect to a Computer or other Device
Wireless Network Connection
3.2.1
1) Find the network. On a WiFi-enabled computer or device, open the window or dropdown menu that allows you to
access wireless networks. The CBR400 network will appear on the list: select this network.
2) Log in. You will need to input the Default Password when prompted. The Default Password is the last eight digits of
the router's MAC address, which can be found on the product box or on the product label on the bottom of the router.
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
NOTE: If more than one CBR400 wireless router is visible, you can find the
correct unit by checking for its SSID (service set identifier; the unique name of
the local network). The SSID can be found on the bottom of the router in the
form CBR400-xxx, where ―xxx‖ is the last 3 digits of the router's MAC address.
FOR MORE HELP AND RESOURCES PAGE 13