Load Balance (Advanced Mode Only) - Cradlepoint CBR400 Product Manual

CBR400| USER MANUAL Firmware ver. 3.3.0
CRADLEPOINT

7.5 Load Balance (Advanced Mode only)

When enabled in Connection Manager (Internet → Connection Manager), the router will use multiple WAN interfaces
to increase the data transfer throughput by using any connected WAN interface consecutively. Connections are load
balanced between interfaces based on a dynamic measurement of bandwidth available.
Leave ―Use default rates‖ selected for automatically defined bandwidth values for Load Balance.
The default minimum rate can be changed to
reflect the minimum bandwidth used during
dynamic measurement. The dynamic
measurement will assume that the interface has
at least the specified minimum bandwidth
available. You have the ability to set these
minimum rates for:
 4G Modem
 Ethernet
 3G Modem
 WiFi
© 2011 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 102