Layered Print (Metallic Silver Cmyk) - Roland VersaStudio BN-20 Master Manual

Using Metallic Silver Ink
Layered Print (Metallic Silver
This section describes how to perform the layered print with the metallic silver ink and CMYK ink using the
metallic silver ink as background.
 P. 45, "Blend Print and Layered Print"
To perform the layered print, you need to use the printing data where the use of the metallic silver ink and
the CMYK ink is designated.
 P. 41, "Creation of Print Data Using Metallic Color (R-Works)," p. 43, "Creation of Print Data Using Metallic Color
(General Application for Drawing)"
(Image of printing method)
The metallic silver ink and the CMYK ink are separated into the different
layers and printed in that order. (Metallic silver ink  CMYK ink)
The printed image
is to be seen from
this side (the printed
surface of the fin-
ished results). of the
finished results).
When using R-Works
Procedure

Create print data.
 P. 41, "Creation of Print Data Using Metallic Color (R-Works)"
50
Chapter 2 Fully Utilizing the Machine
CMYK)

Metallic Silver
CMYK
Media