Stopping Print Output - Roland VersaStudio BN-20 Master Manual

Printing
About the Output-Start Location
The output-start location is always the point shown in the figure below.

Stopping Print Output

To stop output on the printer side
This operation does not cancel standby output data on the computer. Follow the steps below to cancel data
that is still on the computer.
24
Chapter 1 The Basics
Media feed direction
Print area
1.4 mm 5 mm
Print start position
Press and hold down the
POWER key for one second
or more during output.
Output stops. You cannot resume
output from the stop point.
Right pinch
roller
Blade protector