Kohler PRO 2.8 i Owner's Manual page 35

6
33 590 04
3. Remove the spark arrester.
4
4 Spark arrester
711-054e
4. Remove the carbon deposits on the muffler
NOTICE
When cleaning, use the wire brush lightly to avoid
711-022
damaging or scratching of the muffler screen, muf-
fler cap and spark arrester.
5. Check the muffler screen and spark arrester.
711-050
6. Install the spark arrester.
5
TIP
Align the spark arrester lump to the hole in the muffler
pipe.
711-054d
5 Spark arrester lump
6 Hole
7. Install the muffler screen and muffler cap, and
Muffler cap bolt tightening torque:
711-067a
KohlerPower.com
screen, muffler cap and spark arrester using a
wire brush.
Replace them if damaged.
then tighten the muffler cap bolt.
3.5 Nm (0.35 m·kgf, 2.5 ft·lbf)
30