Warning Displays - JVC GC-S5 Instructions Manual

Warning Display

Warning Displays

• The table below lists the warnings that are displayed on the LCD monitor.
Warning Displayed
NO
CARD
CARD NOT
INITIALIZED
CARD
ERROR
CARD
FULL
FILE
LIMIT
PROTECTED
CARD
FRAME
ERROR
PROTECTED
FRAME
READ
ERROR
B
AF
• If "E" appears in the No. of available shots field on the LCD panel and the
viewfinder lamp flashes red, or "SYSTEM ERROR" appears on the LCD
monitor, switch the camera off and leave it for about one hour before
switching it on again. If the camera still fails to operate normally, contact your
JVC dealer or your local authorised JVC service facility and request repairs.
Status
Flashing The camera battery is low on charge
(aP.19).
Flashing No SmartMedia is loaded, or it is loaded
@
incorrectly (aP.24).
Flashing
The SmartMedia is not formatted (aP.59).
@
Flashing The SmartMedia is damaged.
@
The SmartMedia format is incorrect.
Flashing All the frames on the SmartMedia contain
@
recorded images.
Flashing The frame number has reached 99999.
@
Flashing The SmartMedia is write-protected (aP.22).
@
Flashing An attempt was made to play back
@
incorrectly recorded data.
Flashing
A protected frame was erased (aP.57).
@
Flashing An attempt was made to play back a frame
@
not recorded on this camera.
The SmartMedia was removed during
recording, playback, erasing or copying.
Flashing The flash is set to Suppressed Flash mode
or Forced Flash mode, so the shutter speed
is slow and there is a strong likelihood of
camera shake (aP.41).
Flashing The AF (auto focus) cannot operate
@
properly because there is very little contrast
in the subject (aP.27).
91
Explanation