Table of Contents
Advertisement
r Normal (Auto) Mode
Normal Photography
Taking Pictures Using
the LCD Monitor.
Press the [DISP] button to show the live image (the
video image shown before a picture is taken).
Use the monitor brightness adjustment dial to adjust the
brightness so that the image on the LCD monitor is clear.
The still image just photographed appears on the
LCD monitor and is recorded onto the SmartMedia.
The camera cannot be used during this period.
[Example of LCD Monitor Text Display]
Asterisks indicate items that may not be
displayed depending on the camera mode
and photography conditions.
Telephoto
Camera shake
warning
Set the Mode dial to Normal mode [r].
Switch the camera on.
Direction indicator flashes.
(Opening menu appears.)
Viewfinder lamp flashes orange (flash charging).
Viewfinder lamp goes off. Ready to shoot.
Press the shutter button.
Mode
REC
X2
STANDBY
B
Date
2 3 / 1 1 / ' 9 8
Taking Pictures Using
P.33
the Viewfinder.
The image is recorded onto the SmartMedia.
The camera cannot be used during this period.
Standby (ready to shoot)
010
1 2 : 3 4 : 5 6 P M
30
P.21
P.31
P.27
No. of shots
available
Remaining battery capacity
(Displayed for a few seconds
when the power is switched
on, the mode is changed or
the charge is low.)
Time
Advertisement
Table of Contents
