Loading And Removing Smartmedia; Loading The Smartmedia - JVC GC-S5 Instructions Manual

Loading and Removing SmartMedia

Always switch off the camera before removing or loading a SmartMedia.

Loading the SmartMedia

The GC-S5 records photographed images onto a SmartMedia card.
Open the SmartMedia cover.
1
• Slide the SmartMedia cover release
in the direction of the arrow and then
release.
2 Insert the SmartMedia.
• Slide the SmartMedia in slowly so
that the contact area faces the gold
line on the SmartMedia holder
(towards the front of the camera) and
push the SmartMedia in fully.
Close the SmartMedia cover.
3
• When you switch on the camera, the
SmartMedia icon "S" appears on
the LCD panel on the top of the
camera.
• When the viewfinder lamp is flashing
red, a warning appears on the LCD
monitor. Refer to P.91.
! CAUTIONS
• When you are using a new SmartMedia, always use the camera to format the
SmartMedia before use (a P.59).
• See also "SmartMedia" (aP.22).
• If any of the following occur, switch the camera off, clean the contact area on the
SmartMedia, and then reload the SmartMedia.
- "@CARD ERROR" appears on the LCD monitor.
- The images recorded on the SmartMedia are not displayed.
- "– – –" appears in the No. of shots available field on the LCD panel.
24