L Protect Mode (Protecting Your Images); Protecting A Single Frame - JVC GC-S5 Instructions Manual

L Protect Mode (Protecting Your Images)

This feature assigns the read-only attribute to image data to prevent the
images from being inadvertently erased.
! CAUTIONS
• Read-only data is also erased when you format (initialise) a SmartMedia card (aP.59).
• To protect the entire SmartMedia, refer to "Write Protection" (aP.22).

Protecting a Single Frame

Set the Mode dial to [L].
1
• The menu screen appears.
Use the [5] or [6] button to
2
select "FRAME" and press
the [MENU/EXE] button.
3 Use the [3] or [4] button to
select the frame to be
protected and press the
[MENU/EXE] button.
• In step 1, press the [DISP] button to
select the image to be erased in the
same way as in 9-shot multi-frame
playback (aP.29, 53).
• The read-only attribute is assigned to
the frame displayed and the "L"
icon appears under the frame
number.
POWER
PROTECT
[ FRAME ]
PROTECT
<
FRAME
FRAME
76
DIGITAL
MENU / EXE
DSC00010
UNPROTECT ALL
DSC00010
>
L
< > < >
EXE