Auto Transmission At Zero - Excell SI-132 User Manual

EXCELL PRECISION CO., LTD

2-5-6 Auto Transmission at Zero

Select
to set the Auto Transmission at Zero.
ACTIONS
Press TARE key
Use ON/ZERO or UNITS
keys to key in the desired
parameters
Press TARE key
Key in the parameter "00"
Press the TARE key to exit
RS232 serial interface
settings
4 When the parameter is set as
available. It is because when the zero is stable, the transmission becomes
"Continuous Transmission".
SI-132 v1.1
in the RS232 serial interface setting mode
DISPLAY
28
NOTE
Auto transmission at zero
LCD shows the last setting
4 Default setting:
Auto transmission at zero
Use ON/ZERO or UNITS keys to key in the
desired parameters:
ON/ZERO key ⇒ Upward key (from 0 to 9)
UNITS key ⇒ Downward key (from 9 to 0)
TARE key ⇒ Move the cursor to right
NET/GROSS key ⇒ Move the cursor to left.
, the "Auto transmission" function is not
= 00 division of weight value
= 01 division of weight value
= 99 divisions of weight value
SME300000081