The Selection Of The Continuous Transmission Rate - Excell SI-132 User Manual

EXCELL PRECISION CO., LTD

2-5-5 The selection of the Continuous Transmission Rate

Select
to set the Continuous Transmission Rate.
ACTIONS
Press TARE key
Use the ON/ZERO or
UNITS keys to select the
continuous
transmission
rate
Press TARE key
Key in the parameter "00"
Press the TARE key to exit
RS232 serial interface
settings
SI-132 v1.1
in the RS232 serial interface setting mode
DISPLAY
27
NOTE
Continuous transmission rate setting
The LCD shows the last setting.
4 Default setting:
Continuous transmission rate
Use or
ON/ZERO UNITS
the continuous transmission rate:
= 1 time/sec
= 2 times/sec
= 4 times/sec
= 8 times/sec
= 16 times/sec
= More than16 times/sec
ON/ZERO key ⇒ Upward key (from 0 to 9)
UNITS key ⇒ Downward key (from 9 to 0)
TARE key ⇒ Move the cursor to right
NET/GROSS key ⇒ Move the cursor to left.
keys to select
SME300000081