Handsets; Transferring Calls Between Handsets - BT Freestyle 1025 User Manual

Freestyle 1025 User Guide 5/11/99 5:38 pm Page 33
Basic use of Freestyle
additional handsets
Like all cordless phones, the Freestyle
additional handset must be charged for 24 hours
Basic operation of additional handsets is the
same as that of your Freestyle 1025 handset.
You cannot control the answering machine from
the 90/130/1025/1200 additional handset, and it
does not have the call screening facility.
The handset range is up to 200 metres from the
base unit in ideal conditions. If you start to go
out of range while using the phone, you will hear
warning beeps. If you do not come back in range,
your call will be disconnected.
To make a call
Lift the handset off the charger.
Press the
comes on and the handset buttons
illuminate.
Listen for the dialling tone.
Dial the number you want.
KEYPAD
Edition 3 - 13th October 1999
NOTE
before initial use.
NOTE
button. The
TALK IN USE
If you do not hear a dialling tone after pressing the
TALK button, wait a few seconds. On a few exchanges,
there may be a delay.
To end a call
Press the
handset.
Transferring calls between

handsets

While on a call (ie. in talk mode):
Press the
Secrecy
Enter the number of the handset you
KEYPAD
want to transfer the call to. The specified
handset will ring.
To answer the call, press the
If the call is not answered, it is returned to the
original handset after 30 seconds. The original
handset will ring to let you know if this has
light
happened. To avoid having to wait 30 seconds
for the call to be returned, you can press the
TALK button to cancel the transfer of the call.
NOTE
button or replace the
TALK
button.
SECRECY
button.
TALK
NOTE
29