Table of Contents
Advertisement
Freestyle 1025 User Guide 5/11/99 5:37 pm Page 17
To switch from pulse to tone dialling
If you are connected to a pulse dialling
exchange, you can still use services
such as phone banking that require
tone dialling.
Call the telephone number you require
KEYPAD
in pulse mode as usual.
When you have been connected, press
the
your telephone to tone dialling for the
duration of the call.
When you hang up, your Freestyle 1025
will automatically switch back to pulse
dialling.
To page the handset
If you misplace the handset, you can
use
PAGE
Press the
Page
The handset will beep. The
on the base flashes.
Stop the handset beeping by pressing
Page
the
PAGE
or
the
TALK
note: pressing the
off the line, you will then need to put the
handset back onto the base unit.)
Edition 3 - 13th October 1999
button on the keypad to set
to find it again.
button on the base.
PAGE
IN USE
button again
button on the handset. (Please
button will cut
TALK
To insert a pause
With some switchboards, after dialling
the access code you may have to wait
for a moment while the switchboard
picks up an outside line. If so, press
the
Redial
REDIAL
pause before keying in the telephone
number.
To use the recall button
This button signals either time break
R
recall or earth recall depending on the
setting of the dialling mode. If you are
connected to a PBX (Private Branch
Exchange), contact your PBX supplier
for further information.
To set the dialling mode
Press the
Quickdial
standby mode.
light
Press the
1
Press
for Tone dialling.
1
Press
for Pulse dialling.
2
2
Press the
Quickdial
the setting (you will hear a confirmation
tone). If no instruction is received
during this process within 8 seconds,
there will be a beep and the process
will be cancelled before returning to
standby mode.
button to insert a 2.5 second
button during
QUICKDIAL
button.
button to finish
QUICKDIAL
13
Advertisement
Table of Contents
