Registering Handsets - BT Freelance XD7500 User Manual

Registering handsets

You can use up to 4 handsets with your BT Freelance XD7500
base to extend your phone system without needing to install
telephone extension sockets for each new phone.
If you have purchased a multi pack, the handsets in these
packs are already pre-registered to the main base.
If you have purchased an additional handset separately you
must register it to your BT Freelance XD7500 base before it
can be used.
1. Press the Left soft key
is displayed, then press
REGISTRATION
2. is displayed. Enter the base PIN (original setting=0000)
PIN?
and press .
OK
3. The handset will display
button on the base.
4. The handset will temporarily display
display .
HANDSET
When the registration has succeeded, the handset is
automatically assigned the next available handset number.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
then or until
.
OK
, press and hold the
SEARCHING
REGISTERED
Registering another make of handset
to your BT Freelance XD7500 base
If you want to register another make
of handset (i.e. not a BT Freelance XD
7500 handset) to your BT Freelance
XD 7500 base then you will need to
follow the Registration instructions
that came with the handset first and
then continue with the base part of
the registration procedure (as shown
opposite from point 3). Please note
that registering other types of handset
will only provide limited compatibility
i.e. you may only be able to make and
receive calls on the additional handset.
You have 60 seconds to complete the
registration process.
If registration is not successful first
time, please repeat the process again
in case the base registration period ran
out of time.
If there are already 4 handsets
registered to the base, the registration
will fail. You must de-register (delete)
then will
another handset before you can
register the new one. See page 37,
"Delete handset"for instructions.
Handset settings 33