Functional Description; Installing Or Removing Battery Cartridge - Makita GN900 Instruction Manual

Overview of the nailer
1
9
8
1. Battery cartridge
2. Fuel cover
3. Trigger
4. Indication lamp
5. Pusher lever
6. Pusher button
7. Magazine
8. Contact element
9. Hex wrench
009459

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure to remove the fuel cell, the battery
•
cartridge and nails before adjusting or checking
2
3
function on the tool.

Installing or removing battery cartridge

4
6
5
009441
7
Always switch off the tool before insertion or
•
removal of the battery cartridge.
To remove the battery cartridge, withdraw it from
•
the tool while pressing the button on the side of the
cartridge as shown in the figure.
009444
To insert the battery cartridge, hold it so that the
•
battery cartridge front shape fits to that of the
battery installment opening and slip it into place.
Always insert it all the way until it locks in place with
a little click. If not, it may accidentally fall out of the
tool, causing injury to you or someone around you.
Do not use force when inserting the battery
•
cartridge. If the cartridge does not slide in easily, it
is not being inserted correctly.
Fuel cell
Attaching the metering valve to the fuel cell
009445
7
1. Button
1
1. Metering valve
2. Cap
1
2