Replacing Filter Element (Xtremeclean System) - Nilfisk-ALTO ATTIX 30 / PC / XC Operating Instructions Manual

ATTIX 30-40-50
7.2.5 Replacing filter element
(XtremeClean System)
Never use the vacuum clean er with-
out a filter.
22
A
B
All Parts available from
www.sparesgiant.com
01772 329 565
A
A
B
C
D
B
A
1)
Optional accessories / Option depending on model
1. Switch off the vacuum clean-
er and pull the mains plug
out of the socket.
2. Open the retaining clamps
(A) and remove the upper
section of the vacuum clean-
er.
Removing the filter elements:
3. Open fi lter tension part (B).
4. Remove carefully the cas-
settes with fi lter elements.
Inserting the filter elements:
5. Insert new fi lter elements (C)
into the cassettes (D).
6. Attach the cassettes with the
fi lter elements onto the up-
per section of the vacuum
cleaner.
7. Fix the fi lter tension part (B).
8. Dispose of the used fi l-
ter elements in
ance with legal regulations.
9. Attach the upper section of
the vacuum cleaner.
10. Close the retaining clamps
(A). Ensure that the retaining
clamps fit properly.
Original Instruction
accord-