Replacing Filter Element (Push & Clean System) - Nilfisk-ALTO ATTIX 30 / PC / XC Operating Instructions Manual

7.2.4 Replacing filter element
(Push & Clean System)
Never use the vacuum clean er with-
out a filter.
All Parts available from
www.sparesgiant.com
01772 329 565
1) Optional accessories / Option depending on model
Original Instruction
A
B
A
1. Switch off the vacuum clean-
er and pull the mains plug
out of the socket.
2. Open the retaining clamps
(A) and remove the upper
A section of the vacuum clean-
er.
Removing the filter element:
3. Turn the filter holder anticlo-
ckwise and remove it .
4. Carefully remove the filter el-
ement.
5. Clean the filter seal (B).
Check it for damage and re-
place it if necessary.
Inserting the filter element:
6. Fit the filter holder and turn it
clockwise to secure it.
7. Fit the filter holder and turn it
clockwise to secure it.
8. Dispose of the used fi l-
ter element
ance with legal regulations.
9. Attach the upper section of
the vacuum cleaner.
10. Close the retaining clamps
(A). Ensure that the retaining
clamps fit properly.
A
ATTIX 30-40-50
in accord-
21