Cleaning The Filter Element; Cleaning The Filter Element " Push&Clean System " (Attix 30- / 40- / 50-Xx Pc); Www.sparesgiant.com; Cleaning The Filter Element " Xtremeclean - Nilfisk-ALTO ATTIX 30 / PC / XC Operating Instructions Manual

4.3

Cleaning the filter element

4.3.1 Cleaning the filter element
" Push&Clean System "
(ATTIX 30- / 40- / 50-xx PC)
Only for vacuum cleaning without a fil-
ter bag and without a cloth insert filter.
4.3.2 Cleaning the filter
element " XtremeClean "

(ATTIX 30- / 40- / 50-xx XC)

All Parts available from
Only for vacuum cleaning without a
cloth insert filter.

www.sparesgiant.com

01772 329 565
1) Optional accessories / Option depending on model
Original Instruction
If suction performance drops:
1. Turn switch to position "I" (maximum suction power).
2. Close the nozzles or suction hose opening with the palm of your
hand.
3. Press the button to start filter cleaning three times. The resulting
stream of air removes attached dust from the slats of the filter
elements.
To ensure that suction performance is always at its best, the filter
element is automatically cleaned during operation. We recommend
complete cleaning if the filter element becomes extremely dirty.
1. Switch off the vacuum cleaner
2. Close the nozzles or suction hose opening with the palm of your
hand.
3. Turn the switch to position „I" and let the cleaner operate for ap-
prox. 10 seconds with the suction hose opening closed.
Filter Cleaning System
10 sec .
ATTIX 30-40-50
15