Suction Power Control; All Parts Available From; Auto-On/Off-Operation - "Auto" Switch Position - Nilfisk-ALTO ATTIX 30 / PC / XC Operating Instructions Manual

ATTIX 30-40-50

4.2.3 Suction power control

4.2.4 Auto-On/Off-Operation
- "auto" switch
position
The vacuum cleaner is switched on
and off by the power tool connected.
Dirt is picked up from the source of
dust immediately.
To comply with regulations, only ap-
proved dust producing tools should
be connected.
The maximum power consumption
of the connected electrical appli-
ance is stated in section "Technical
data".
Before switching the switch to posi-
tion „auto", ensure that the tool con-
nected to the appliance socket is
switched off.
14
1)
1)

All Parts available from

www.sparesgiant.com
01772 329 565
auto
auto
1)
Optional accessories / Option depending on model
Switch
Function
position
The suction
power control
switch allows
precise
adaptation of
the suction
power for
different
cleaning tasks.
1. Switch off the vacuum clean-
er.
2. Switch off the power tool.
3. Connect the power tool and
the vacuum cleaner with a
suction hose.
4. Insert the plug of the power
tool into the tool socket on
the operating panel of the
vacuum cleaner.
5. Switch on the vacuum clean-
er. Switch in "auto" position.
6. Switch on the power tool. The
vacuum cleaner motor starts
when the connected power
tool is switched on.
When the power tool is
switched off, the vacuum
cleaner continues to run for
a short moment so that any
dust in the suction hose is
conveyed to the filter bag.
Original Instruction