Summary of Contents for Nilfisk-ALTO ATTIX 30 / PC / XC
Page 1
ATTIX 30 / PC / XC ATTIX 40 / PC / XC ATTIX 50 / PC / XC ATTIX 50-21 PC EC Operating Instructions All Parts available from www.sparesgiant.com 01772 329 565 107400397 D...
Page 2
ATTIX 30-40-50 ATTIX 30 All Parts available from ATTIX 50 www.sparesgiant.com 01772 329 565 ATTIX 40...
ATTIX 30-40-50 Contents Important safety instructions ....................2 Description Operating elements ..............6 Operating panel ..............7 Before starting the Assembling the vacuum cleaner...........8 cleaner 3.1.1 Taking accessories out of the packaging ......8 3.1.2 Attaching the suction pipe holder to the suction pipe ..8 Inserting the filter bag ............9 Control / Operation...
ATTIX 30-40-50 1 Important safety instructions Symbols used to mark Prior to using the appliance for the first time, be sure to read instructions this document through and keep it ready to hand. DANGER Danger that leads directly to serious or irreversible injuries, or even death.
Page 5
ATTIX 30-40-50 Transport 1. Before transporting the dirt tank, close all the locks. 2. Do not tilt the cleaner if there is liquid in the dirt tank. 3. Do not use a crane hook to lift the cleaner. Storage 1. Store the appliance in a dry place, protected from frost. Electrical connection 1.
Page 6
2. Regularly check whether the power cord is damaged or shows signs of ageing. 3. Have the faulty mains connecting lead replaced by your Nilfisk-Alto service representative or a qualified electri- cian prior to using the appliance again. DANGER The upper section of the vacuum cleaner contains live components.
Page 7
The use of non-genuine spare parts and accessories can impair the safety of the appliance. 01772 329 565 1. Only use spare parts and accessories from Nilfisk-Alto. 2. Use only the brushes supplied with the vacuum cleaner or specified in the operating manual.
ATTIX 30-40-50 2 Description Operating elements Handle with receptacle for electrical lead Fixing point for suction pipe holder Retaining clamp Castor Dirt tank Inlet fitting Applicance switch Appliance socket Operating knob for filter cleaning ATTIX 30 All Parts available from www.sparesgiant.com 01772 329 565 ATTIX 50...
ATTIX 30-40-50 Operating panel ATTIX 30- / 40- / 50-01 All Parts available from www.sparesgiant.com 01772 329 565 ATTIX 30- / 40- / 50-11 auto ATTIX 30- / 40- / 50-21 Optional accessories / Option depending on model Original Instruction...
ATTIX 30-40-50 3 Before starting the cleaner Assembling the 1. Take vacuum cleaner and vacuum cleaner accessories out of the pack- 3.1.1 Taking accessories out aging. of the packaging 2. The mains plug should not yet be inserted into a socket. 4.
ATTIX 30-40-50 Inserting the filter bag 1. The mains plug should not yet be inserted into a socket. 2. Open the retaining clamps (A) and remove the up- per sec-tion of the vacuum cleaner. 3. Insert the filter bag into the dirt tank.
Page 12
ATTIX 30-40-50 4. Press the filter bag connec- tion firmly on to the inlet fitting. 5. Attach the upper section of the vacuum cleaner. 6. Close the retaining clamps (A ). Ensure that the retain- All Parts available from ing clamps fit properly. www.sparesgiant.com 01772 329 565 Optional accessories / Option depending on model...
ATTIX 30-40-50 4 Control / Operation Connections 1. Connect the suction hose. 4.1.1 Connecting the suction hose 4.1.2 Electrical connection 1. Ensure that the cleaner is switched off. 2. Insert the power cord into a The operating voltage shown on the properly installed and fused rating plate must corres pond to the socket with earthing contact.
ATTIX 30-40-50 4.2.3 Suction power control Switch Function position The suction auto power control switch allows precise adaptation of the suction power for different cleaning tasks. 4.2.4 Auto-On/Off-Operation 1. Switch off the vacuum clean- - "auto" switch position 2. Switch off the power tool. 3.
ATTIX 30-40-50 Cleaning the filter element 4.3.1 Cleaning the filter element " Push&Clean System " (ATTIX 30- / 40- / 50-xx PC) Filter Cleaning System Only for vacuum cleaning without a fil- ter bag and without a cloth insert filter. If suction performance drops: 1.
Does not apply to XC machines. If foam appears, stop work immediately and empty the tank. To reduce the amount of foam, use foam killer Nilfisk-Alto Foam Stop (see section "Accessories" for order number). Optional accessories / Option depending on model...
ATTIX 30-40-50 6 After finishing work Switching the vacuum 1. Switch off the cleaner and cleaner off and storage pull the mains plug out of the socket. 2. Wind up the power cord onto the handle (A). Begin wind- ing up the cord at the cleaner end and not the plug end to prevent the power cord from tangling up.
ATTIX 30-40-50 7 Maintenance Maintenance plan After finishing work When required 7.2.1 Emptying dirt tank 7.2.2 Replacing the filter bag 7.2.3 Replacing the disposal bag 7.2.4 Replacing filter element (Push&Clean) 7.2.5 Replacing filter element (XtremeClean) Maintenance work 1.
ATTIX 30-40-50 7.2.2 Replacing the filter bag 1. Switch off the vacuum clean- er and pull the mains plug out of the socket. 2. Open the retaining clamps (A) and remove the upper section of the vacuum clean- Removing the filter bag: 3.
ATTIX 30-40-50 7.2.3 Replacing the disposal 1. Switch off the vacuum clean- er and pull the mains plug out of the socket. 2. Open the retaining clamps (A) and remove the upper section of the vacuum clean- Removing the disposal bag: 3.
ATTIX 30-40-50 7.2.4 Replacing filter element 1. Switch off the vacuum clean- (Push & Clean System) er and pull the mains plug out of the socket. Never use the vacuum clean er with- 2. Open the retaining clamps out a filter. (A) and remove the upper section of the vacuum clean- Removing the filter element:...
ATTIX 30-40-50 7.2.5 Replacing filter element 1. Switch off the vacuum clean- (XtremeClean System) er and pull the mains plug out of the socket. Never use the vacuum clean er with- 2. Open the retaining clamps out a filter. (A) and remove the upper section of the vacuum clean- Removing the filter elements: 3.
• Switch off the vacuum cleaner has tripped. and allow it to cool for approx. 5 minutes. If the cleaner cannot be started again, contact the Nilfisk-Alto service department. > Motor is faulty. • Have motor changed by Nilfisk-Alto Service.
ATTIX 30-40-50 9 Further information Recycling the cleaner Make the old cleaner unusable immediately. 1. Unplug the cleaner. 2. Cut the power cord. 3. Do not discard of electrical appliances with household waste. As specified in European Directive 2002/96/EC on old elec- trical and electronic appliances, used electrical goods must be collected separately and recycled ecologically.