Gestetner A193 Service Manual page 689

  

13. Press
14. Press then
If the software has been successfully
uploaded, the display shows 'OK'.
Otherwise, the display shows 'NG'.
15. Exit the service mode.
16. Turn off the ac and main switches, then
disconnect the tools.
NOTE: If the machine had a Function Upgrade Card before uploading
the software, be sure to put the card back in the slot before
switching on.
17. Turn the machine back on.
18. Print the system parameter list to check if the previous settings have
been successfully recovered.
(A639)

5-5
FCU
A194R530.img
A194R540.img
SM